Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clutch cable replaced...
#2
set wrong.
the steps are 2 ways, one at pedal and one at bell lever. either works.

my guess is the free play is way too much.
did you see those pages here.
Free play in cable is set to 1/4-1/2 inch , at clutch pedal. using the nut 19,. (CW from end removes play) 1/4 is best.
or at bell lever 1/8" play? 20 to 80 thou,, or about 1/8 inch, 0.125" max.
chapter 7c7
both way show, with stiff cold cable , bottom way works best.

dont give up
do the pedal height tests, if off clutch acts really odd. non linear, oddness, to extreme.....

the real deal.
http://www.acksfaq.com/96-FSM-v1-7C-pdf.htm
http://www.fixkick.com
Reply


Messages In This Thread
Clutch cable replaced... - by cosmic_splatter - 08-09-2014, 06:13 AM
RE: Clutch cable replaced... - by fixkick - 08-09-2014, 07:13 AM
RE: Clutch cable replaced... - by cosmic_splatter - 08-09-2014, 12:39 PM
RE: Clutch cable replaced... - by fixkick - 08-09-2014, 11:20 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)