08-09-2014, 06:13 AM
fixkick,
I replaced my clutch cable today. The old one was a bit gummed up from old grease or something. Here are a couple of questions...
1. I adjusted the clutch so that it grabs about 1/4 from the floor? Is this about right?
2. With the old cable and new cable, I get a slight "clunk" when shifting from 1st to 2nd. Is this normal? 3,4 and 5th are fine. It's only second gear which gives me a bit of clunk no matter how I shift it. It seems better when you are going up hill, then the clunk is not heard as much. Is this normal?
thanks,
John
I replaced my clutch cable today. The old one was a bit gummed up from old grease or something. Here are a couple of questions...
1. I adjusted the clutch so that it grabs about 1/4 from the floor? Is this about right?
2. With the old cable and new cable, I get a slight "clunk" when shifting from 1st to 2nd. Is this normal? 3,4 and 5th are fine. It's only second gear which gives me a bit of clunk no matter how I shift it. It seems better when you are going up hill, then the clunk is not heard as much. Is this normal?
thanks,
John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.