08-08-2014, 08:08 PM
Okay,. There is no other way I can check the fpreg? Like blowing/suck the vakuum hose?
I get no reaction (RPM)when pulling the vakuum hose at the plenum, and blocking at plenum...
If I let air in offcourse it reacts.
Can I put any Regulator back in? like this http://www.ridetech.se/bransletrycksregu...lack/413-0
Its an adjustable between 1-6BAR, set it at 3 BAR?
There are adapters included.
I get no reaction (RPM)when pulling the vakuum hose at the plenum, and blocking at plenum...
If I let air in offcourse it reacts.
Can I put any Regulator back in? like this http://www.ridetech.se/bransletrycksregu...lack/413-0
Its an adjustable between 1-6BAR, set it at 3 BAR?
There are adapters included.