Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bosch 02 Pic and Plug question....
#1
Fixkick,

Here is a shot of the new bosch 02 sensor on the right. The previous sensor is on the left. It's interesting to see the different engineering designs. Not sure if you can tell the health of these visually.
http://www.fixkick.com/bbs2/Suzuki-bbs/g...46_43.jpeg

I also changed the dizzy and spark plugs. What I found was that the spark plugs were barely tightened. I would say they were little more than hand tight. I put the new ones in and tightened down the washer and then gave it a final snug. I'm just wondering if these are supposed to be in fairly loose?

Also, here is a shot of the dizzy cap. You can see the corrosion on the posts. Top left one is really bad. I'm glad I'm changing all this stuff.
http://www.fixkick.com/bbs2/Suzuki-bbs/g...47_46.jpeg

John

ps. I didn't put any anti-sieze on these, I hope I didn't make a mistake here.
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
Reply


Messages In This Thread
Bosch 02 Pic and Plug question.... - by cosmic_splatter - 08-08-2014, 01:56 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)