Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can you set timing using diag software?
#6
your welcome !!! happy hunting....

let me know when you get 180F?
and when a new 02 (with working heater) how fast closed loop hits from dead cold engine (sure it's longer in Siberia) but need bench mark for typical summer day.
the 1996 can do this in under 20 seconds.
the limit is not the year, not the 02 sensor (it heats same speed as the 96) it's pure firmware, in the ECU.. i find that interesting, these. facts.

closed loop fast saves fuel and prevents stress on the CAT too.

a new stat will warm up much faster, it delays opening....
http://www.fixkick.com
Reply


Messages In This Thread
RE: Can you set timing using diag software? - by fixkick - 08-06-2014, 12:37 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)