06-28-2014, 04:00 AM
I have been reading almost every thread regarding similar problems as I have...But couldn't really solve my problem..
Car:
Vitara 16v G16B 5door JLX -94
About 190000km
JSAETD01V00150018
ETD01V
*When warming up it revs between 1500-2000, stabilizes after about a minute or 2, down to around 1200.
*Warm stable 800rpm
BUT
When pressing my pedal gently it lacks of power whatever speed I go. I can either let go/pedal to the metal to get rid of this "Jerk/bogg/powerdrop".
But when I want to cruise with gentle pressure on the pedal it keeps doing this. More or less from time to time.
And MPG feels pretty poor, maybe 1.2/L/10Km (I'm swedish
*TPS indicates
from 1-3
idle 0.45Kohm ----WOT 4.5 Kohm
(the other pins is whitin the recomended intervals)
*The cable shoe
0V, ~5V,0.2V, ~5V
(when key in ON position)
Also check engine when unplugged
*When removing MAP I get the check engine and rpm changes.
(cleaned)
* EGR looked like a fulltime smoking old mans lungs. But is cleaned(and fully function, if I press the silicone part it stalls, correct?)
* No leaks when spraying brake cleaner
I may have forgot something, and my english might be a bit incorrect. but I hope someone have a clue
Thanks!
Car:
Vitara 16v G16B 5door JLX -94
About 190000km
JSAETD01V00150018
ETD01V
*When warming up it revs between 1500-2000, stabilizes after about a minute or 2, down to around 1200.
*Warm stable 800rpm
BUT
When pressing my pedal gently it lacks of power whatever speed I go. I can either let go/pedal to the metal to get rid of this "Jerk/bogg/powerdrop".
But when I want to cruise with gentle pressure on the pedal it keeps doing this. More or less from time to time.
And MPG feels pretty poor, maybe 1.2/L/10Km (I'm swedish
*TPS indicates
from 1-3
idle 0.45Kohm ----WOT 4.5 Kohm
(the other pins is whitin the recomended intervals)
*The cable shoe
0V, ~5V,0.2V, ~5V
(when key in ON position)
Also check engine when unplugged
*When removing MAP I get the check engine and rpm changes.
(cleaned)
* EGR looked like a fulltime smoking old mans lungs. But is cleaned(and fully function, if I press the silicone part it stalls, correct?)
* No leaks when spraying brake cleaner
I may have forgot something, and my english might be a bit incorrect. but I hope someone have a clue
Thanks!