06-04-2014, 05:37 AM
things i did
checked plug gap .028 no change
cleaned MAF with CRC no change
checked thermostat , no gasket , added rubber "O" ring gasket no change
found loose mounting screw on TPS , tightened screw no change
checked WTC sensor , ok , forgot to plug in WTC , CAR RAN ALMOST perfect,
replaced WAT sensor (plugged it in this time) misses at no load , disconnect WTC sensor , runs almost perfect!
checked voltage at WTC , 4.7 volts.
Any suggestions? I am in Santee california , Any experts in my area?
Have a SUZUKI shop manual on order.
Thanks
Lon
checked plug gap .028 no change
cleaned MAF with CRC no change
checked thermostat , no gasket , added rubber "O" ring gasket no change
found loose mounting screw on TPS , tightened screw no change
checked WTC sensor , ok , forgot to plug in WTC , CAR RAN ALMOST perfect,
replaced WAT sensor (plugged it in this time) misses at no load , disconnect WTC sensor , runs almost perfect!
checked voltage at WTC , 4.7 volts.
Any suggestions? I am in Santee california , Any experts in my area?
Have a SUZUKI shop manual on order.
Thanks
Lon