05-06-2014, 08:21 PM
the PRNDL swith has only one function here, to block starting in gear.
the PRNDL switch can be bypassed with jumper, wire, now car starts in gear.
the igniition switch needs to work. it must send 12vdc power to the starter in start position.
may offroad only cars, have a dash switch that wires from IGN terminal, to the starter. and cranks any time key is turned on and the button pressed.
its just a momentary closed switch. in fact they sell them for that and dash horn buttons.
the key switch prevents ignition or cranking and both with no key
the PRNDL kills starting in gear.
both can be bypassed.
the PRNDL switch can be bypassed with jumper, wire, now car starts in gear.
the igniition switch needs to work. it must send 12vdc power to the starter in start position.
may offroad only cars, have a dash switch that wires from IGN terminal, to the starter. and cranks any time key is turned on and the button pressed.
its just a momentary closed switch. in fact they sell them for that and dash horn buttons.
the key switch prevents ignition or cranking and both with no key
the PRNDL kills starting in gear.
both can be bypassed.
http://www.fixkick.com