02-29-2024, 04:05 AM
(02-28-2024, 11:02 PM)fixkick Wrote: in 1996 step 7 changed.
there is no TSB covering this change it is a factory change (ghosted)
and nobody asks why the step 7 has GM grease slapped over, Shell koyo grease. (only GM book states that)
Nice! That’s more descriptive than the 1990 GM FSM. Also, I like how they added grease sloppiness to the retainer/bearing in the technical drawing.
The one thing that bothers me about my retainer ring(s) is that both rubberized FIP gaskets were basically destroyed during removal. So much so that I removed them completely. I’m hoping the RTV does its job but I’ve never had 100% success with RTV. Eventually it leaks or on this case doesn’t seal.
Also, in the 1990 FSM, they call for GM# 1052366 sealant which I believe has been replaced by Threebond 1217h according to the internet. Is the Suzuki bond 1215 a rebranded Threebond product as well?