Fuel Sending Units

[fixkick]

full is
3ohms +- 3 ohms so 3-3 = 0 ohms full. and is same value as shorting the wire to it and seeing the gauge go to Full.
this is spec for full.
a very crude and simple device it is.


long ago my answers were better (grin, im older than dirt)

https://fixkick.com/forum/thread-fuel-gage-sending-unit



or better yet my tank pages

https://www.fixkick.com/sensors/fuel-gauge-tests.html

in 1996 (EPA.gov new EVAP laws and new tests for same)
the gauge sender was upgraded. to 1% accuracy !
EVAP EPA monitor test must not be run if tank if full. so the sender was upgraded so false evap tests, are not tripped. DTC errors false ! (yours has no EVAP test 95)

this is not important to you but gee, what if old senders are not sold now. 29 years later, (happens)
then we use 96 parts here.
this is my comment on parts. harder to find.
and tank size matters, for 2 to 4doors laster is bigger.
I no longer have the real SUZ part list for 95, sadly.


the dealer still lists it here


https://www.suzukicarparts.com/oem-parts...wtbDQtZ2Fz


Sending Unit - Suzuki (34810-60A11) ID #9

60a code means first G16 engines SV416 bodies.