|
89 MT 4x4 Grinding on coast or decel
|
01-10-2022, 03:51 PM
Put new CV's on both sides when I did the lift kit a few years ago since I knew the change in driveshaft angle would have likely stressed and split the old boots. Can't remember what brand but they were aftermarket. Nonetheless, even if they were a sub-standard Chinese product, considering the low mileage put on each year I'd be surprised if they had failed already.
The microphone will tell all... |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
89 MT 4x4 Grinding on coast or decel - by WizBang - 01-02-2022, 07:34 AM
RE: 89 MT 4x4 Grinding on coast or decel - by fixkick - 01-02-2022, 11:01 PM
RE: 89 MT 4x4 Grinding on coast or decel - by fixkick - 01-02-2022, 11:03 PM
RE: 89 MT 4x4 Grinding on coast or decel - by fixkick - 01-02-2022, 11:27 PM
RE: 89 MT 4x4 Grinding on coast or decel - by WizBang - 01-03-2022, 04:59 AM
RE: 89 MT 4x4 Grinding on coast or decel - by fixkick - 01-03-2022, 12:01 PM
RE: 89 MT 4x4 Grinding on coast or decel - by WizBang - 01-04-2022, 05:19 AM
RE: 89 MT 4x4 Grinding on coast or decel - by fixkick - 01-04-2022, 10:59 PM
RE: 89 MT 4x4 Grinding on coast or decel - by WizBang - 01-05-2022, 03:25 PM
RE: 89 MT 4x4 Grinding on coast or decel - by fixkick - 01-05-2022, 10:02 PM
RE: 89 MT 4x4 Grinding on coast or decel - by WizBang - 01-10-2022, 03:51 PM
|
