X90 "clutch position switch" Questions

[fixkick]

I should have reinforced the bracket similar to the 8th pic. I thought about it but didn't. I did weld the pedal where it joins the shaft as it looked like a crack was starting there. I've worked on many vehicles and machines but never been such a frustrating position to work. You need extra joints in fingers and hands!
I have decided the PO reefed up on the pedal in frustration when trying to put the spring on the pedal [because I sure wanted to]
I'm putting the old clutch cable back in until the new Suzuki OE one comes as it is ok but for the rubber boot.

i remove the front driver seat, to do that, or nothing but pain, happens.  

this job is not the worst , that is a bad heater core leaking,  no fun there ever.

as long as your pedal splins are still good,  this job is just tedious welding. all cracks and all spots that look weak and are, plenty of those.

I do wish you an  easy job there,  , good luck and happy trails.