Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Improperly seated torque converter
#6
the 2wd and 4wd output shaft in the 4speed box are not the same. (and is part rear clutch pack not trivial at all)

98 uses different oil line fittings on right side of tranny box but i think (IDK) they are the same in use. due to the clue below, all 96 to 98 transmissions g15 4speed have same factory part numbers.

G16 use suffix 57b10 on all, 4speed, whole tranny P/N: WHOLE BOX 96 ,97,98.
http://www.fixkick.com
Reply


Messages In This Thread
Improperly seated torque converter - by Samistine - 09-07-2021, 12:26 PM
RE: Improperly seated torque converter - by fixkick - 09-08-2021, 05:19 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)