06-08-2021, 07:22 PM
Good day all, newbie here,
I have looked for a thread but not found answer, so here's my request. I need to replace the valve stem oil seals in a 96 1.6 16v motor, can I do it without removing the head? It looks like I need to remove the cam shaft and of course the rocker shaft. I have a valve spring compressor for in-situ valve spring compression.
Thanks for advice
I have looked for a thread but not found answer, so here's my request. I need to replace the valve stem oil seals in a 96 1.6 16v motor, can I do it without removing the head? It looks like I need to remove the cam shaft and of course the rocker shaft. I have a valve spring compressor for in-situ valve spring compression.
Thanks for advice