05-05-2021, 07:57 AM
part 5 is and matches my EPC catalog too.
1171060A01
there are no J18, outside of usa. or N.America, canada has some,
but
so 2 front engine side, mounts
then 1 front rear mount #5
and one rear transfer mount called a snubber by suzuki drawings
those front mounts have lots of part number changes, based on vin code 96-98 serials at the end of VIN.
so what is your vin serial.
Tnnnnnn
Vnnnnnn
Wnnnnnn (1998 is Whiskey coded vin serial
super complex this,.
see my photos.
ID1
on year 1998, serial W4109494~ (~ means this an up sn) new front L/R mounts.
on year 1996, id 9/16 the 2 mounts changed, (front center rear, 9 type, T4103335 then changed T4103336~ new(and yours)
part id 14 mount, changed, on sn, T410103335 1996)
and last what I think is wrong is transfer-case snubber beat to death as is so common .
ok here comes the 4 drawings from year 1998 original suz.
for J18 only 4wd doors, 5sp. (V code means VAN = 4doors)
5 minutes to put them in the Image gallery
1171060A01
there are no J18, outside of usa. or N.America, canada has some,
but
so 2 front engine side, mounts
then 1 front rear mount #5
and one rear transfer mount called a snubber by suzuki drawings
those front mounts have lots of part number changes, based on vin code 96-98 serials at the end of VIN.
so what is your vin serial.
Tnnnnnn
Vnnnnnn
Wnnnnnn (1998 is Whiskey coded vin serial
super complex this,.
see my photos.
ID1
on year 1998, serial W4109494~ (~ means this an up sn) new front L/R mounts.
on year 1996, id 9/16 the 2 mounts changed, (front center rear, 9 type, T4103335 then changed T4103336~ new(and yours)
part id 14 mount, changed, on sn, T410103335 1996)
and last what I think is wrong is transfer-case snubber beat to death as is so common .
ok here comes the 4 drawings from year 1998 original suz.
for J18 only 4wd doors, 5sp. (V code means VAN = 4doors)
5 minutes to put them in the Image gallery
http://www.fixkick.com