04-16-2014, 11:52 PM
that rumor at on ZUK forum , the guy must be doing 2wd, axle and is not at spec torque. sad.
you beat me buying it by 1hr. sorry you lost cash for rumors...
i wonder if the pins inside are T shaped, like nails, and the alum. alloy strong enough. only way to tell is cut the drive head off and extend it with alum. pipe.
on mine , 100k miles , the locking ring was at 200 lbs and took an impact gun to release it.
on my other 2 kicks it took less.
you beat me buying it by 1hr. sorry you lost cash for rumors...
i wonder if the pins inside are T shaped, like nails, and the alum. alloy strong enough. only way to tell is cut the drive head off and extend it with alum. pipe.
on mine , 100k miles , the locking ring was at 200 lbs and took an impact gun to release it.
on my other 2 kicks it took less.
http://www.fixkick.com