04-12-2014, 01:06 AM
your welcome and i did make an error, i forget that my bench has CMP generator running full time,
you must be cranking or running to get codes (most) beyond code 12, on the bench.
im sorry i didnt say that.
this is why we crank for 5 seconds to get 41/42 DTC , other wise the ECU is just sleeping...
your compression is very good.
but no 12s on the bench is a bad ECU.
when cranked over the OBD1 catastrophic monitors wake up; with CMP action, i think, my bench CMP is a just Megasquirt STIM card or my Arduino generator, i use now.
all it takes is the CMP squire wave. to wake it up.
happy trails.
you must be cranking or running to get codes (most) beyond code 12, on the bench.
im sorry i didnt say that.
this is why we crank for 5 seconds to get 41/42 DTC , other wise the ECU is just sleeping...
your compression is very good.
but no 12s on the bench is a bad ECU.
when cranked over the OBD1 catastrophic monitors wake up; with CMP action, i think, my bench CMP is a just Megasquirt STIM card or my Arduino generator, i use now.
all it takes is the CMP squire wave. to wake it up.
happy trails.
http://www.fixkick.com