03-03-2021, 12:57 AM
the EGR has 2x , 6mm bolts holding it on and way way hard to reach back of intake man.
best is not to force them
use penetrating oil there and best is spray there hot and let engine cool and this fluid sucks in hot to cold
and then jog them, CCW,CW ,ccw, jogged, to get them lose gently with about 5 ft./lbs torque, 100inch.lbs is spec, so go easy not stamp these screws.
let me know how you do
and do ask questions,
the tests are mostly simple, using normal car tools.
best is not to force them
use penetrating oil there and best is spray there hot and let engine cool and this fluid sucks in hot to cold
and then jog them, CCW,CW ,ccw, jogged, to get them lose gently with about 5 ft./lbs torque, 100inch.lbs is spec, so go easy not stamp these screws.
let me know how you do
and do ask questions,
the tests are mostly simple, using normal car tools.
http://www.fixkick.com