01-19-2021, 08:41 AM
(This post was last modified: 01-19-2021, 08:42 AM by rjm.
Edit Reason: Spelling
)
Once I find a new isc I’ll dissect the old 1 and take pics. It clearly a simple valve just not clear what is path of flow - 3 holes in valve and 3 holes in TB. With 1 of those being the polygon shape blocked by gasket.
If I shake the old one it does rattle a bit. But the fact that all 3 holes pass air to one another with no power I’m betting this unit is dead and allowing too much air / lean condition.
We will see - soon
If I shake the old one it does rattle a bit. But the fact that all 3 holes pass air to one another with no power I’m betting this unit is dead and allowing too much air / lean condition.
We will see - soon