01-17-2021, 07:37 AM
The isc solenoid functions fine electrically but I'm unsure how to test the sealing aspect. I followed fixkick instructions of blowing into 1 hole (using hose and mouth) to confirm no air passes to "other hole" when NO VOLTAGE is present. I confirmed I get air passing through ALL 3 holes with NO VOLTAGE and with VOLTAGE! I'm not understanding which holes should flow air on a PROPERLY operating noid. We have 3 holes in BOTH the noid and the TB.
Could you please explain the flow path of this device?
I am now on a quest to find a replacement in the junk yard but want to be able to test it before I buy it. Also could you clear up the uncertainty of which holes should pass air with noid powered (for 1 second max)
Thanks rj
Could you please explain the flow path of this device?
I am now on a quest to find a replacement in the junk yard but want to be able to test it before I buy it. Also could you clear up the uncertainty of which holes should pass air with noid powered (for 1 second max)
Thanks rj