01-17-2021, 05:18 AM
causes all (tps errors)
1: there are 3 throttle cables, one for 3 speed trans, 1 for cruise box and one for drivers right foot. what you have on car I do not know. (options)
if any are not set loose this makes the TPS fail. the throttle main cable to foot is set with 10mm slack(almost 1/2 and inch) in the manual it is. how to do all those.
2: TPS not calibrated per manual with feeler gauge set. (cause only error.44 /45) switch failure for this or line 1)
3: TPS is bad. (both switch and angle side can fail)
this sensor bad cause tip in bogs, not misfire, misfire is spark only , bogging is lack of fuel;. as in can not burn air , lean.
misfire too can be one injector failing and 1 cyclinder going dead or at radome.
TPS errors must not be ignrored. ever.
1: there are 3 throttle cables, one for 3 speed trans, 1 for cruise box and one for drivers right foot. what you have on car I do not know. (options)
if any are not set loose this makes the TPS fail. the throttle main cable to foot is set with 10mm slack(almost 1/2 and inch) in the manual it is. how to do all those.
2: TPS not calibrated per manual with feeler gauge set. (cause only error.44 /45) switch failure for this or line 1)
3: TPS is bad. (both switch and angle side can fail)
this sensor bad cause tip in bogs, not misfire, misfire is spark only , bogging is lack of fuel;. as in can not burn air , lean.
misfire too can be one injector failing and 1 cyclinder going dead or at radome.
TPS errors must not be ignrored. ever.
http://www.fixkick.com