suzuki intake and TB swap from 91+ to 89-90 car

[pablo4444]

Thank you, Ok I know it may be confusing to get to the point, but as I wrote before /I know it may be a bit chaotic too many informations at once/ I am keeping all old stuff there exept new intake+TB that means I will NOT BE replacing my old distributor or the camshaft. It will be all the same as it ever was before, so that ECU will be the same old and will be communicating with old stuff as before. old coil old distributor old head old cam old spark plugs all old stuff. I need just to wire it right.

1. Good point on ISC and Ohm issue /yes it may get slower I will adress it when it comes up but thank you really that is something to keep an eye on/
2. You wrote "the EGR vsv nipple port on the TB, newer, it is ported too, and I think the correct way" thank you also for this information, I can better manage the hoses

Best regards