the ecu has table inside
that correct the non linear nature of the 58B00 MAF
and if not same , I can imagine the ECU going nuts.
The table takes log curve actual and converts it to linear, FLOW. so the math to inject is simple
I have no faith in any china no name brands
a new one was sent to me to test, DOA in shop
opened it up and the PCB inside was wired backwards. I reversed engineered a schematic for fun, (insomnia)
here it is failing
https://fixkick.com/sensors/china-maf/cloned-maf.html
that correct the non linear nature of the 58B00 MAF
and if not same , I can imagine the ECU going nuts.
The table takes log curve actual and converts it to linear, FLOW. so the math to inject is simple
I have no faith in any china no name brands
a new one was sent to me to test, DOA in shop
opened it up and the PCB inside was wired backwards. I reversed engineered a schematic for fun, (insomnia)
here it is failing
https://fixkick.com/sensors/china-maf/cloned-maf.html
http://www.fixkick.com