04-05-2014, 11:49 PM
i gave mine away, sorry.
they are expensive, over 50 bucks.
the sadder part is the auto store rented tool set, has no suzuki support. at all here.
that is why most shops ,just pound it off with a chisel and pound it back on , and send you on your way. and early failures.. happen.
one could make one, if you used old drill bits as the pin source.
the pins take a huge force.
http://www.ebay.com/itm/89-03-Geo-Tracke...78&vxp=mtr
here is a clone
they guy who sells it dont know it dont fit 97-98 trackers as it has GM locks. not suzuki.
the GM plant put on wavy lock nuts. then.
ours didnt have it yet,
they are expensive, over 50 bucks.
the sadder part is the auto store rented tool set, has no suzuki support. at all here.
that is why most shops ,just pound it off with a chisel and pound it back on , and send you on your way. and early failures.. happen.
one could make one, if you used old drill bits as the pin source.
the pins take a huge force.
http://www.ebay.com/itm/89-03-Geo-Tracke...78&vxp=mtr
here is a clone
they guy who sells it dont know it dont fit 97-98 trackers as it has GM locks. not suzuki.
the GM plant put on wavy lock nuts. then.
ours didnt have it yet,
http://www.fixkick.com