1994 1.6 16v valve lash

[ramm440]

This is my second time to adjust the lash and greatly appreciate all of your knowledge. So I decided to set the lash at .005 (cold) to try to lessen the ticking after its warmed up. I did this on all 16 valves using the recommended method (gap between the cam heel and rocker arm method). I have started the engine and all sounds good but I am a damn perfectionist and thinking about maybe going back in and setting it to .006 because as I learned too tight can burn a valve or more. The ticking has slightly lessened. So please give me your thoughts.