10-20-2020, 11:38 PM
okay so i have done some research both on the truck and on your tech pages , I must say you have done a excellent job describing the mech functions of all the specific equipment so much that it has left my feeble brain somewhat overloaded to a certain extent.anyway it looks like the PO has installed a motor or at least the intake and throttle body from a auto truck, even the ecu from serial list you provided confirms this . is this a issue as i am running a samurai manual transmission? trucks runs okay although it has a high idle which i will start trouble shooting using your directions on the tech pages. i do have a spare ecu from a 89 manual truck i could swap out if needed