10-16-2020, 07:17 PM
the manual test is putting the TCM in to limp mode (only some gears work and shift's lever runs solenoids direct)
the ECU has engine limp too,.
if the transmission is dead (4sp) the ECU can not calculate engine loads correctly what it does then IDK.
Load is part of calculations for fuel ratios and spark advance. (and performance)
the ECU has engine limp too,.
if the transmission is dead (4sp) the ECU can not calculate engine loads correctly what it does then IDK.
Load is part of calculations for fuel ratios and spark advance. (and performance)
http://www.fixkick.com