Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Camshaft Position Sensor Cap O-Ring 1.8
#6
Thank you very much for the good information.

After sleeping on the situation, I pulled the camshaft position sensor yet again and this time removed the indexing disc. I found and removed a tiny spec of debris from the wheel no bigger than a 64th round. I cleaned the whole wheel with alcohol, reassembled and the sidekick started and ran perfectly. I will reinstall the new plugs and set timing.
I know and should have been more rational with this failure... ~ The Most likely cause of fault is what was most recently worked on.

Thanks Again.
Reply


Messages In This Thread
RE: Camshaft Position Sensor Cap O-Ring 1.8 - by Xoloski - 10-11-2020, 12:55 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)