10-09-2020, 12:49 AM
Thank you for the quick and informative reply.
Before removal, I did index the camshaft position sensor housing to the head for reassembly.
Now that I know that the dust cap o-ring us unavailable, I will proceed with the minimal RTV application.
I will also test timing with timing light, with wire jumpered and engine at operating temperature.
I will also replace the valve cover gasket, PCV grommet, valve & hose, and the valve cover to throttle body breather hose.
I'll install new spark plugs as well.
Before removal, I did index the camshaft position sensor housing to the head for reassembly.
Now that I know that the dust cap o-ring us unavailable, I will proceed with the minimal RTV application.
I will also test timing with timing light, with wire jumpered and engine at operating temperature.
I will also replace the valve cover gasket, PCV grommet, valve & hose, and the valve cover to throttle body breather hose.
I'll install new spark plugs as well.