09-14-2020, 09:09 AM
next time you work on rods and cranks see those bearing shells and the very tiny oil slot there?, dirt inside an engine lands there and the bearing will starve and no longer have pressure there and now is metal to metal hitting. ( A CLEAN engine can go 300,000 miles here. )
the oil there on those bearing is a pressurized oil cushion , and most not fail. (or metal to metal hits and bam,. wrecked)
clean is king, inside any engine,
good luck with your project, I did not know the pan was custom, now do.
'
the oil there on those bearing is a pressurized oil cushion , and most not fail. (or metal to metal hits and bam,. wrecked)
clean is king, inside any engine,
good luck with your project, I did not know the pan was custom, now do.
'
http://www.fixkick.com