08-18-2020, 10:16 PM
.4 ohm is mostly lead jack resistance, short the leads see 0.2 ohms then test resistor see .4, 1/2 of that is meter leads errors.
in the old days we had RX1 and up range and R-1/10 range shows tenths of ohms. (and calib zero knob)
your resistor is ok.
in the old days we had RX1 and up range and R-1/10 range shows tenths of ohms. (and calib zero knob)
your resistor is ok.
http://www.fixkick.com