set TV gap to .2" , not to bore but my silly crude reference drawings they are for seeing things work standing back just looking.
so turn the bleed screw, top of TB 16v top rear, under rubber cap, CCW counter clock wise until 800 is hit the ISC wakes up.
then turn 1/2 turn more.? (very crude duty cycle iSC setting above, just to get it going and woke up.
ah here, the 0.2 is just a gander moment, if way off seen clear as day it is , the bore to TV is .001 or .0005" gap.
or so water pour inside, can not go past the TV cables all 3 lose. to TV.
or closed 99.9% so closed but never 100% as that makes it jam and wears out the bore, there is no spec at suzuki, I guess its on flow bench at Mukuni.
![[Image: Tb-95-gap.jpg]](https://fixkick.com/IDLE-AIR/Slide_Show/images/Tb-95-gap.jpg)
when done, hot air comes from BLEED and ISC and not the TV ever. hot idle. IAC is closed hot. so can no leak air.
seems other messed the never touch screw but is so easy to fix.
so turn the bleed screw, top of TB 16v top rear, under rubber cap, CCW counter clock wise until 800 is hit the ISC wakes up.
then turn 1/2 turn more.? (very crude duty cycle iSC setting above, just to get it going and woke up.
ah here, the 0.2 is just a gander moment, if way off seen clear as day it is , the bore to TV is .001 or .0005" gap.
or so water pour inside, can not go past the TV cables all 3 lose. to TV.
or closed 99.9% so closed but never 100% as that makes it jam and wears out the bore, there is no spec at suzuki, I guess its on flow bench at Mukuni.
when done, hot air comes from BLEED and ISC and not the TV ever. hot idle. IAC is closed hot. so can no leak air.
seems other messed the never touch screw but is so easy to fix.
http://www.fixkick.com