07-27-2020, 03:10 AM
lots of parts up front to fail. the cars are old.
CV, struts, balls joints, tie rod ends.
PS all parts.
even wheel bearings on this car love to fail for sure done wrong, not at 180ft lbs set. for sure.
finding it is not easy, 2 persons can help, one bouncing car and look for loose parts. (or noise)
also use a magic lever. try to flex all parts see if movement is not normal.
look for wheel bearing play over .001" 1 thou. if is , it is bad.
on my 91, the lower A arm day one, the bolt holding i ton was 1 tread from falling out. damn
what happens at 60MPH and the "A" arm fail, omg nasty results.
looking first always matters. look for wrong things and missing things and loose.
CV, struts, balls joints, tie rod ends.
PS all parts.
even wheel bearings on this car love to fail for sure done wrong, not at 180ft lbs set. for sure.
finding it is not easy, 2 persons can help, one bouncing car and look for loose parts. (or noise)
also use a magic lever. try to flex all parts see if movement is not normal.
look for wheel bearing play over .001" 1 thou. if is , it is bad.
on my 91, the lower A arm day one, the bolt holding i ton was 1 tread from falling out. damn
what happens at 60MPH and the "A" arm fail, omg nasty results.
looking first always matters. look for wrong things and missing things and loose.
http://www.fixkick.com