03-26-2014, 12:45 PM
I pinched the hose on the top of the IAC, and the surging stopped. I followed the hose back, and it comes out of the air intake pipe just after the MAF.
My manual says that the ECM calculates the valve position based on the battery voltage, coolant temperature, engine load and engine speed. Hmm...
My manual says that the ECM calculates the valve position based on the battery voltage, coolant temperature, engine load and engine speed. Hmm...
Sidekicks:
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive
Red '95, 2-door, 16V, Automatic
Blue '94, 4-door, 16V, Manual
White '96, 4-door, 16V, Automatic, soon to be 1.9TD-manual
Motorcycles:
'84 GR650 "Tempter"
'79 GS850, shaft drive