the TV bore gap size is and was never ever, told by SUZUKI.
I use my most small feeler to do that. .0005" (jag told .001")
here is a very rare book view on rare car that does shows this sitting, set it once and never touched again.
JAG: example. some folks love to mess up this screw. engine in LIMP mode, idles too slow and black smoke out tail pipe, they panic and set this.
if we must panic, use the bleed screw not this one. (on hot engine ISC controls idle speed, IAC cold.)
![[Image: TB-Stops.jpg]](https://fixkick.com/sensors/tests/TB-Stops.jpg)
I use my most small feeler to do that. .0005" (jag told .001")
here is a very rare book view on rare car that does shows this sitting, set it once and never touched again.
JAG: example. some folks love to mess up this screw. engine in LIMP mode, idles too slow and black smoke out tail pipe, they panic and set this.
if we must panic, use the bleed screw not this one. (on hot engine ISC controls idle speed, IAC cold.)
http://www.fixkick.com