07-18-2020, 11:39 PM
and lands here, (rust)
here is the 10micron screens, TBI, and note how easy to see them and clean them,
the 16v can not be seen, only back-flow ultrasonic cleaned, (I see top shops doing that are backlogged a month now due to kungFLu19) wow that is bad.
also the 2 o-rings here can leak , even crack this old. but the test is easy. on TBI super easy
horn off top of TB person 1 and 2, person 1, starts engine, then with p2, looking at the injector, p1 keys off and the injector must NOT LEAK FUEL at the tip or at the 2 orings inside, (3 places to leak)
![[Image: Iac-inj-view1w.jpg]](https://fixkick.com/IDLE-AIR/Iac-inj-view1w.jpg)
here is the 10micron screens, TBI, and note how easy to see them and clean them,
the 16v can not be seen, only back-flow ultrasonic cleaned, (I see top shops doing that are backlogged a month now due to kungFLu19) wow that is bad.
also the 2 o-rings here can leak , even crack this old. but the test is easy. on TBI super easy
horn off top of TB person 1 and 2, person 1, starts engine, then with p2, looking at the injector, p1 keys off and the injector must NOT LEAK FUEL at the tip or at the 2 orings inside, (3 places to leak)
http://www.fixkick.com