Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CEL out, cannot pull OBD1 codes. How to fix?
#12
ok, vin shows very early 1993
says rubber ring thermostat fits this car,

the VIN Pxxxxxxxxx
P= 1993
P4 means the 4 means made in Iwata, Japan Plant.
your next digit is 0 means early engine, 1mm lip themostat.
but gee cards this old have engine switch, or wow even intake swaps
so only looking in the stat pIT works. that and only that.
or buy the thermostat 180f and be sure it comes with both gaskets, some sold you must buy them separate those gaskets.
each maker has there own rule here on what is in the box. new/'

good luck!
http://www.fixkick.com
Reply


Messages In This Thread
RE: CEL out, cannot pull OBD1 codes. How to fix? - by fixkick - 07-15-2020, 04:19 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)