1998 tracker 4 sp crank pulley wobble

[fixkick]

Update:

So I put loctite 263 (couldn't get 271 tonight) on snout then put timing gear on. I then proceeded to place shims between snout and gear checking for concentricy. It is now within  0.001" and torqued down to 94 ft/lbs. Since I'm this far ill pull the head and verify true TDC since keyway isn't perfect. Probably close to head gasket change time anyway. Thanks for all the help

I will cross fingers to you can get that snugged up tight.
some have done so,  using loctite, (it cures with no air )
if super clean , it can be strong.

good luck to you and that Trackick..