IAfter taking a look I’m convinced that the problem is internal in the bell housing, thinking it’s a bent shaft. In addition to the clutch & TO bearing (which I'll order from US) - I'm going to order the shaft, lever (lever spline doesnt look great), TO pin, shaft spring, shaft bushings from megazip.
Never done something like this before, so hopefully I get it right. If you think theres anything I left out please let me know!
Here is the list of stuff I'm going to order (clutch & bearing not listed):
https://imgur.com/a/Kshs4Fk
cheers!
Never done something like this before, so hopefully I get it right. If you think theres anything I left out please let me know!
Here is the list of stuff I'm going to order (clutch & bearing not listed):
https://imgur.com/a/Kshs4Fk
cheers!