|
Can't read CEL
|
12-19-2019, 01:17 AM
Hello All, Have a 94 geo tracker. misfiring pretty bad and the coolant temp gauge on the dash does not work. Check Engine Light ON. I can't get the light to flash to check the code. I have tried using different wires and pin combos (I started bridging 2 + 3) is there something I am missing?
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Can't read CEL - by eggsalads - 12-19-2019, 01:17 AM
RE: Can't read CEL - by eggsalads - 12-19-2019, 03:14 PM
RE: Can't read CEL - by fixkick - 12-19-2019, 10:53 PM
RE: Can't read CEL - by eggsalads - 12-20-2019, 06:06 AM
RE: Can't read CEL - by fixkick - 12-20-2019, 06:46 AM
RE: Can't read CEL - by eggsalads - 12-20-2019, 07:09 AM
RE: Can't read CEL - by fixkick - 12-20-2019, 09:23 AM
RE: Can't read CEL - by fixkick - 12-20-2019, 09:55 AM
RE: Can't read CEL - by eggsalads - 12-20-2019, 12:06 PM
RE: Can't read CEL - by fixkick - 12-21-2019, 12:04 AM
RE: Can't read CEL - by fixkick - 12-21-2019, 12:09 AM
RE: Can't read CEL - by fixkick - 12-21-2019, 12:31 AM
|
