10-31-2019, 12:58 AM
Well looks like I put too much lift on the rear. The drive-line vibrates at 70 MPH on the freeway and surely will burn up the U joints faster. I can air down the bags and the vibration essentially goes away. I may need to cut the 4 " tube lowering the bags down an inch or so. I hope not as that will be a pain. I also have a a shorter third link spacer for the rear axle that is shorter than the one that was on the rig when I purchased it. Its about a 4" now and the one i got is 2" so I suppose I could give that a whirl and see it it makes a difference.
Onward to dial this in.
Onward to dial this in.