10-08-2019, 03:53 AM
Thanks for all the help. Took it out and cleaned it again. (Tapped it with a wrench a few times) seems to have started working again. I have a new issue that has arisen during the weekend.
My house is right at sea level. Idle holding 800 +- 50 even in gear now. 950 with load. However while I was hunting change in elevation was dropping my idle alot. At 4000' idle with load was 400rpm. Go down the mountain and totally fine again. Also had issues starting it while at higher altitudes. Usually starts within a couple cranks. Up there about 15 cranks. Any ideas?
My house is right at sea level. Idle holding 800 +- 50 even in gear now. 950 with load. However while I was hunting change in elevation was dropping my idle alot. At 4000' idle with load was 400rpm. Go down the mountain and totally fine again. Also had issues starting it while at higher altitudes. Usually starts within a couple cranks. Up there about 15 cranks. Any ideas?