06-29-2019, 09:35 PM
(06-29-2019, 09:26 PM)five20too Wrote: Sorry I haven't reported back but I got really busy this week. Thanks for that link above. I will definitely have to send off my injectors to get them cleaned. On a side note, I did take the MAF off my other rig, cleared the code and started it. I don't ever remember it starting that easily or running that smoothly! No more code and it has plenty of power now. I guess I never thought the MAF could make it seem like a fuel starvation issue, but once you do some reading, it lets you know that the ratios get all mixed up when the MAF isn't measuring the air volume properly. Thanks again for all of your help and I hope that maybe this will help someone else!
great news
and a spare at home making this easy
the MAF is not fun or easy to test, can be if you had a flow bench, (LOL) or vacuum cleaner shop, sized huge or a leaf blower, to get 3vdc or more out of it, see my maf page for how.
sure am glade it runs right !! cheers
http://www.fixkick.com