05-02-2013, 10:16 AM
I saw your detective work on Gorkys bad maf. WOW. Both times I installed new maf it barely ran. Idle was unbelievably low. Within a minute or so plugs carbon up so bad it starts misfiring horriibly, then stalls. The last time I tried the new maf , Key on 1.517 volt . It idled around 550-600 rpm and read 2.28 volts with minute fluctuations. Very quickly rpms dropped lower and stalled out. I dont think I was even able to get it up to 3000 rpms with new maf.