04-23-2019, 04:05 AM
thermostat wax side down and bleed hole forward (jiggle pin) so it can self burp.
http://www.fixkick.com
|
Cold start/idle Issue!
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Cold start/idle Issue! - by tquick79 - 04-22-2019, 04:13 AM
RE: Cold start/idle Issue! - by fixkick - 04-22-2019, 04:59 AM
RE: Cold start/idle Issue! - by tquick79 - 04-22-2019, 05:20 AM
RE: Cold start/idle Issue! - by fixkick - 04-22-2019, 05:05 AM
RE: Cold start/idle Issue! - by tquick79 - 04-22-2019, 05:48 AM
RE: Cold start/idle Issue! - by fixkick - 04-22-2019, 08:29 AM
RE: Cold start/idle Issue! - by tquick79 - 04-22-2019, 09:51 AM
RE: Cold start/idle Issue! - by tquick79 - 04-22-2019, 03:00 PM
RE: Cold start/idle Issue! - by fixkick - 04-22-2019, 10:03 PM
RE: Cold start/idle Issue! - by tquick79 - 04-22-2019, 10:39 PM
RE: Cold start/idle Issue! - by fixkick - 04-23-2019, 12:30 AM
RE: Cold start/idle Issue! - by tquick79 - 04-23-2019, 01:19 AM
RE: Cold start/idle Issue! - by fixkick - 04-23-2019, 04:05 AM
RE: Cold start/idle Issue! - by tquick79 - 04-23-2019, 04:57 AM
RE: Cold start/idle Issue! - by fixkick - 04-23-2019, 10:06 PM
RE: Cold start/idle Issue! - by JCTracker - 12-24-2019, 08:22 AM
RE: Cold start/idle Issue! - by fixkick - 12-24-2019, 08:41 AM
|
Users browsing this thread: 3 Guest(s)