Hello,
I have a 96 Tracker 2wD 5 speed, 2 door.
I noticed today that when I slowly depress the clutch, I hear a weird sound.
I took a look at the clutch release lever, where it connects to the clutch release shaft. All I saw was a metal cylinder type bearing, protruding outwards to the lever. I used a flathead to push the bearing back in, and then the weird sound when away.
But after driving a couple blocks, the metal bearing started making its way back out.
Is the part I'm talking about part #7 in this diagram? If so, I do not see a part #9 (is #9 supposed to be rubber?)
Or are the parts I'm talking about parts #7 and #10? (shown on the other side).
SO:
Does anyone know what these parts (the ones I need) are called? And if so, where I can order them?
Would installing them be as easy as just removing the clutch release lever, and then just inserting the metal bushing, then the rubber one (if part number 9 or 10 is rubber?)
I'm refering to this diagram, but the ACKSfaq shows a slightly different diagram, where the bushings could be refered to as clutch release shaft bushing? (part 745 OR 746...)
![[Image: clutch.JPG]](http://www.fixkick.com/tranny/clutch/clutch.JPG)
Any help would be appreciated
I have a 96 Tracker 2wD 5 speed, 2 door.
I noticed today that when I slowly depress the clutch, I hear a weird sound.
I took a look at the clutch release lever, where it connects to the clutch release shaft. All I saw was a metal cylinder type bearing, protruding outwards to the lever. I used a flathead to push the bearing back in, and then the weird sound when away.
But after driving a couple blocks, the metal bearing started making its way back out.
Is the part I'm talking about part #7 in this diagram? If so, I do not see a part #9 (is #9 supposed to be rubber?)
Or are the parts I'm talking about parts #7 and #10? (shown on the other side).
SO:
Does anyone know what these parts (the ones I need) are called? And if so, where I can order them?
Would installing them be as easy as just removing the clutch release lever, and then just inserting the metal bushing, then the rubber one (if part number 9 or 10 is rubber?)
I'm refering to this diagram, but the ACKSfaq shows a slightly different diagram, where the bushings could be refered to as clutch release shaft bushing? (part 745 OR 746...)
Any help would be appreciated