04-02-2019, 11:56 PM
So i read everything and i have had some success but wanted to run it by you. I checked to make sure the belt was tight and everything was perfect when it comes to timinng the crank, cam and distributor. The code was still being thrown so i took your advice and went to time it with the strobe.
When i inserted the freeze jumper to the DLC the CODE DISAPPEARED! When ran with the short there is no code thrown. I accidentally broke my timing light and need to pick a new one up today but ill make sure to time it correctly. I hope this fixes the problem but its nice to see the engine not throwing a code. Ill check to see if the ECU is the right one as it has a giant Mitsubishi logo on the case so i definitely need to check that.
When i inserted the freeze jumper to the DLC the CODE DISAPPEARED! When ran with the short there is no code thrown. I accidentally broke my timing light and need to pick a new one up today but ill make sure to time it correctly. I hope this fixes the problem but its nice to see the engine not throwing a code. Ill check to see if the ECU is the right one as it has a giant Mitsubishi logo on the case so i definitely need to check that.