sorry for that,
well 2004+ up are integrated, hubs, in fact no bearings sold here.
but your car is 89 to 98 hubs, and have press in beariings.
I have no idea how to use 2001+ hubs on any 1996. sorry
2wd hubs just have a cap that covers the place the axle end fits.
suzuki sells 96 hubs, for crazy high prices , naked totally.
https://www.suzukicarparts.com/parts/199...CallOut=10
ACdelco did but STOPPED, FW252 not made now. fw253 with abs ring, that can be remove easy for no ABS.
but is not made.
what we do is buy the bearing hand it to the PRESS man, and say press out old , and press in new. that is the normal way.
my hub bearing page covers all this and pitfalls.
http://www.fixkick.com/hubs/FW_BEARINGS.html
see drawing #4 and 2wd hub above. and iD #3, 2wd drive hug cap.
why not just press in new bearings
nobody here posted that 2001+ hubs will fit ,not yet. They still are crush bearings and are torqued near 180foot/lbs. no cheating that.
well 2004+ up are integrated, hubs, in fact no bearings sold here.
but your car is 89 to 98 hubs, and have press in beariings.
I have no idea how to use 2001+ hubs on any 1996. sorry
2wd hubs just have a cap that covers the place the axle end fits.
suzuki sells 96 hubs, for crazy high prices , naked totally.
https://www.suzukicarparts.com/parts/199...CallOut=10
ACdelco did but STOPPED, FW252 not made now. fw253 with abs ring, that can be remove easy for no ABS.
but is not made.
what we do is buy the bearing hand it to the PRESS man, and say press out old , and press in new. that is the normal way.
my hub bearing page covers all this and pitfalls.
http://www.fixkick.com/hubs/FW_BEARINGS.html
see drawing #4 and 2wd hub above. and iD #3, 2wd drive hug cap.
why not just press in new bearings
nobody here posted that 2001+ hubs will fit ,not yet. They still are crush bearings and are torqued near 180foot/lbs. no cheating that.
http://www.fixkick.com