seen one 96 the
top induction pipe (huge) mount cracked and making tons of noise, huge, scary
and the loose bottom of header flange sounds like bad main bearings , 10x scary that, for sure on new engine, yikes. and simple
do not fear removing parts, or even using a 2x4" but 5 foot board and lever force the engine, left,right or even front to rear. use force, see if odd sounds end. or get worse.
just making sure its inside the engine, we do that.
Im sure this is old hat stuff that.
top induction pipe (huge) mount cracked and making tons of noise, huge, scary
and the loose bottom of header flange sounds like bad main bearings , 10x scary that, for sure on new engine, yikes. and simple
do not fear removing parts, or even using a 2x4" but 5 foot board and lever force the engine, left,right or even front to rear. use force, see if odd sounds end. or get worse.
just making sure its inside the engine, we do that.
Im sure this is old hat stuff that.
http://www.fixkick.com