Inspected keyway, it’s all good. Compression still bad on most cylinders, but still above 100psi. Got 160psi on a cylinder after pouring more oil down it. The other one I tested didn’t seem to improve. I’m just going to put everything together and see how it runs. The compression might go up after some run time.
Could rebuild the engine, but I don’t have the energy for that this time of the year. Maybe I get it running and if there’s not enough power, I do a re-ring in the summer.
Keyway pic: https://m.imgur.com/FPnle9d
Replaced seal as the one on it was damaged. It did not go flush with the metal, which I think is just a design thing. It’s even though.
Could rebuild the engine, but I don’t have the energy for that this time of the year. Maybe I get it running and if there’s not enough power, I do a re-ring in the summer.
Keyway pic: https://m.imgur.com/FPnle9d
Replaced seal as the one on it was damaged. It did not go flush with the metal, which I think is just a design thing. It’s even though.